![]() ![]() Uniqueness: The 48-bit MAC address space is designed to be globally unique.The last 64 bits of an IPv6 address (known as the interface identifier) are often derived from the MAC address to ensure uniqueness within a local network. Stateless Address Autoconfiguration (SLAAC): In IPv6, SLAAC is a mechanism that allows hosts to configure their IPv6 addresses automatically.Here are a few reasons why converting a MAC address to an IPv6 address interface identifier is done: ![]() This process is commonly used in Stateless Address Autoconfiguration (SLAAC), a method by which IPv6 hosts can automatically configure their interface addresses without the need for manual configuration or a DHCP server. Why Should You Convert MAC to IPv6?Ĭonverting a MAC (Media Access Control) address to an IPv6 (Internet Protocol version 6) address is typically done to generate the interface identifier part of an IPv6 address. ![]() So, the IPv6 Interface ID is 3E3C:4DFF:FE5E. In our example, the modified first byte is 3E, and the "FFFE"-inserted part is 3C:4D:FF:FE:5E. In our example, if the first byte is 3C, invert the "U/L" bit, and it becomes 3E.Ĭombine: Combine the modified first byte with the "FFFE"-inserted part. In our example, it becomes 3C:4D:FF:FE:5E.įlip the "U/L" bit: Invert the second least significant bit of the first byte of the MAC address. Insert "FFFE": Insert "FFFE" in the middle of the MAC address. While there isn't a direct conversion between MAC addresses and IPv6 addresses, there is a common technique to generate an IPv6 Interface ID from a MAC address, which is commonly used in Stateless Address Autoconfiguration (SLAAC).Įxtract the MAC address: For example, if the MAC address is 00:1A:2B:3C:4D:5E, take the last 6 bytes (3C:4D:5E) as the MAC address.
0 Comments
Leave a Reply.AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |